This product is not in stock and can be ordered by sending an email to firstname.lastname@example.org, calling on 77078072 or by visiting one of our shops. A 50% deposit is also required to confirm the order. Delivery costs are included and takes 7-12 days.
The best brand in the hydroponic market when it comes to measuring instruments presents you with the BlueLab Truncheon EC , for those who are looking for the best instruments and the ultimate precision!!!
The Bluelab Truncheon Meter is the high quality nutrient meter with a fully waterproof design and no calibration required. Perfectly readable in daylight thanks to its blue LED display.
The world's favorite EC tester! Simply Brilliant; brilliantly simple!
It is essential in hydroponics to know the impact of your solution before feeding it to your plants.
It is very easy, if you use the Bluelab EC Truncheon tester to read your solution.
Immerse the probe for 1 to 2 minutes in the solution which then reaches the same temperature as the solution. The reading is indicated when the light flashes. Calibration of the tester is not necessary.
- Displayed values for EC (0.2 - 3.6), for CF (2 - 36) and for ppm scales (TDS and 700 scale)
- Totally waterproof
- No calibration is necessary
- Automatic switching on and off in contact or out of solution.
- No external switch or adjustable any buttons
- Minimum autonomy 1 year
- 5 year Bluelab warranty
- Range: 0.2 to 3.6 EC
- Resolution: 0.1 EC
- Accuracy at 2.77EC and 25°C/77°F: +/- 0.1 EC, +/- 1CF, +/- 50 ppm (1385ppm and 500 ppm), +/- 70 ppm (1939 ppm at 700 ppm)
- ATC Technology
- No calibration required
- Automatically turns off
- Power supply: 3 AA batteries
- Units of measurement: EC, CF and PPM.
Suitable applications: hydroponics, horticulture, floriculture, swimming pools...
When growing, it is essential to know precisely the nutrient values that feed your plants.
To take a reading of your solution, simply place the Truncheon probe head in the solution for 1-2 minutes to match the temperature of the BlueLab tester with that of the solution. Then remove it from the solution and put it back in again to take the EC or CF or ppm reading of your solution. Finally rinse the probe after use in cool, clean water (at least once a week) to ensure accurate EC values.
No tester calibration is required. Also very handy for stirring up your nutrient reservoir.
Precautions for use:
The instrument is as precise as the probe is clean!!! Cleaning the probe is one of the most important factors when owning any tester from Bluelab. If the probe is contaminated or dirty, it affects the accuracy of the displayed value. The surface of the probe is where the instrument takes the reading of the solution. The information is fed back from the probe into the instrument's electronic brain. A calculation is then made in the processor (or microcomputer instruments depending on the BlueLab models employed) and the reading is then displayed.
Regular cleaning of the probe or probes of BlueLab testers is a very easy task and prolongs the life of the probes.
This instrument signed by BlueLAb is certainly more expensive but the quality is priceless and neither is the result!!!